ONKYO TX-SR603X Manual De Instruções

 

69

 

The Audio Adjust functions are explained below.

 

■

 

This setting determines which channel is output from a 
stereo multiplex source. Use it to select audio channels 
or languages with multiplex sources, multilingual TV 
broadcasts, and so on.

 

The main channel is output (default).

 

The sub channel is output.

 

Both the main and sub channels are output.

 

■

 

This setting specifies the channel to be used for playing 
any 2-channel digital source such as Dolby Digital, or 2-
channel analog/PCM source in the Mono listening 
mode. 

 

Both the left and right channels are output 
(default).

 

Only the left channel is output.

 

Only the right channel is output.

 

These settings provide for playing any 2-channel digital 
source such as Dolby Digital, or 2-channel analog/PCM 
source in the PLIIx Music listening mode. 

 

■

 

With this function, you can broaden the width of the 
front stereo image when using the Pro Logic II Music or 
Pro Logic IIx Music listening mode.

 

Panorama function on.

 

Panorama function off (default).

 

■

 

With this setting, you can move the sound field forward 
or backward when using the Pro Logic II Music or Pro 
Logic IIx Music listening mode. The default setting is 3. 
Higher settings move the sound field forward. Lower set-
tings move it backward.
If the stereo image feels too wide, or there is too much 
surround sound, move the sound field forward to 
improve the balance. Conversely, if the stereo image 
feels like it is in mono, or there is not enough surround 
sound, move it backward.

 

■

 

With this function, you can adjust the width of the sound
from the center speaker when using the Pro Logic II 
Music or Pro Logic IIx Music listening mode. Normally
if you are using a center speaker, the center channel 
sound is output by only the center speaker. (If you are not 
using a center speaker, the center channel sound will be 
distributed to the front left and right speakers to create a 
phantom center). This setting controls the front left, 
right, and center mix, allowing you to adjust the weight 
of the center channel sound. It can be adjusted from 0 to 
7 (default is 3).

 

■

 

The DTS Neo:6 Music listening mode creates 6-channel
surround sound from 2-channel (stereo) sources. With 
this setting, you can specify by how much the front left
and right channel output is attenuated in order to create
the center channel. It can be adjusted from 0 to 5 (default
is 3). This setting is unavailable if no surround speakers
are connected.
When set to 0, the front left and right channel output is
attenuated by half (–6 dB), giving the impression that the 
sound is located centrally. This setting works well when 
the listening position is considerably off center. When 
set to 5, the front left and right channels are not attenu-
ated, maintaining the original stereo balance.

 

■

 

This setting determines how Dolby Digital EX signals 
are handled. This setting is unavailable if no surround 
back speakers are connected.

 

If the source signal contains a Dolby Digital 
EX flag, the Dolby Digital EX listening mode 
is used (default).

 

You can select Pro Logic IIx Movie, Pro 
Logic IIx Music, Dolby Digital, or Dolby 
Digital EX.

TXSR603X.book 69 ページ ２００５年８月３日 水曜日 午後２時２分