Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. TX-SR606
  5. Guia Do Utilizador

ONKYO TX-SR606 Guia Do Utilizador

Download
Página de 104
 
84
 
Zone 2
 
—Continued
 
If you’ve connected your Zone 2 speakers to the AV 
receiver, as explained in “Connecting Your Zone 2 
Speakers Directly to the AV receiver” on page 83, you 
must set the Powered Zone 2 setting to Act (Activated).
 
Notes:
 
• When Act is selected and Zone 2 turned on, the Zone 2 
speakers connected to the ZONE 2 L/R speaker termi-
nals output sound, but the surround back speakers con-
nected to the SURR BACK L/R speaker terminals do 
not. When Act is selected and Zone 2 turned off, the 
surround back speakers output sound as normal.
• Powered Zone 2 cannot be used if Speaker Type is set 
to Bi-Amp.
• This procedure can also be performed on the AV 
receiver by using its [SETUP], [ENTER], and arrow 
buttons.
 
Powered Zone 2 Setting
 
1
 
Press the [RECEIVER] REMOTE 
MODE button, followed by the 
[SETUP] button.
 
The main menu appears onscreen.
If the main menu doesn’t appear, make 
sure the appropriate external input is 
selected on your TV.
 
2
 
Use the Up and Down [
]/[
] 
buttons to select “7. Hardware-
Setup,” and then press [ENTER].
SETUP
RECEIVER
ENTER
 
3
 
Use the Up and Down [
]/[
] 
buttons to select “2.Zone2,” and 
then press [ENTER].
 
4
 
Use the Left and Right [
]/[
] 
buttons to select:
 
Not Act:
 
  ZONE 2 SPEAKERS L/R 
speaker terminals not acti-
vated (Powered Zone 2 dis-
abled).
 
Act:
 
  ZONE 2 SPEAKERS L/R 
speaker terminals activated 
(Powered Zone 2 enabled).
 
5
 
Press the [SETUP] button.
 
Setup closes.
7–2. Zone2
Powered Zone2 
Not Act
TX-SR606_En.book Page 84 Friday, May 9, 2008 1:28 PM