ONKYO TX-SR607 Manual Do Utilizador

88

Note:
To control Zone 2, you must press the remote control-
ler’s [ZONE 2] button first.

Notes:
• Only analog input sources are output by the ZONE 2 

LINE OUT and ZONE 2 L/R speaker terminals. Dig-
ital input sources are not output. If no sound is heard 
when an input source is selected, check if it’s con-
nected to an analog input.

• While Powered Zone 2 is being used, listening modes 

that need surround back speakers (i.e., Dolby Digital 
EX and DTS-ES) are unavailable. 

• While Zone 2 is on, 

u functions will not work.

• You cannot select different AM or FM radio stations 

for your main room and Zone 2. The same AM/FM 
radio station will be heard in each room. For example, 
if you have an FM station for the main room, that sta-
tion will also be used in Zone 2.

• Zones can also be unmuted by adjusting the volume.

Press the [ZONE 2] button, then 
point the remote controller at the 
AV receiver and press the [ON/
STANDBY] button.
Zone 2 turns on, the ZONE 2 indicator 
lights up.

To select an input source for 
Zone 2, press the [ZONE 2] 
button, followed by an INPUT 
SELECTOR button.
To select AM or FM press the [TUNER] 
INPUT SELECTOR button repeatedly. 
On the North American model, you can 
also select SIRIUS.

Note:
You cannot select different AM or FM 
radio stations for your main room and 
Zone 2. The same AM/FM radio station 
will be heard in each room.

q]/[w] button.

If your Zone 2 speakers are connected 
to a receiver or integrated amp in Zone 
2, use its volume control to adjust the 
volume.