ONKYO TX-SR304 Manual De Instruções
35
First Time Setup
—Continued
5
Use the Down [
] button to
select “Center,” and then use the
Left and Right [
Left and Right [
]/[
] buttons to
select
Small
,
Large
, or
None
.
Small:
Select if the center speaker is
small.
small.
Large:
Select if the center speaker is
large.
large.
None:
Select if no center speaker is
connected.
connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
selected.
6
Use the Down [
] button to
select “Surround,” and then use
the Left and Right [
the Left and Right [
]/[
] but-
tons to select
Small
,
Large
, or
None
.
Small:
Select if the surround speak-
ers are small.
ers are small.
Large:
Select if the surround speak-
ers are large.
ers are large.
None:
Select if no surround speakers
are connected.
are connected.
Note:
• If the Front setting in step 4 is set to
Small, the Large option cannot be
selected.
selected.
7
Press the [SETUP] button.
Setup closes.
When you want to go back up one
menu level to “SP Config,” press the
[RETURN] button.
When you want to go back up one
menu level to “SP Config,” press the
[RETURN] button.
SETUP
Testing the speakers
To test that all of the speakers are working properly,
press the remote controller’s [TEST TONE] but-
ton.
To test that all of the speakers are working properly,
press the remote controller’s [TEST TONE] but-
ton.
The test tone will be output by each speaker in turn
and the name of each speaker will appear on the dis-
play. To turn off the test tone, press the [TEST
TONE] button again.
• If the test tone is not produced by a speaker, or it’s
and the name of each speaker will appear on the dis-
play. To turn off the test tone, press the [TEST
TONE] button again.
• If the test tone is not produced by a speaker, or it’s
produced by a speaker other than that shown on
the display, you may have wired the speakers
incorrectly and you should check your connec-
tions (see pages 18, 19).
the display, you may have wired the speakers
incorrectly and you should check your connec-
tions (see pages 18, 19).
• If the test tone is not produced by a speaker and its
name does not appear on the display, you may
have set the speaker settings incorrectly (see
page 34).
have set the speaker settings incorrectly (see
page 34).
RANDOM
SUBTITLE
PLAY MODE
AUDIO
REPEAT
RC-
645S
LISTENING MODE
DISPLAY
TEST TONE
CH SEL
SURROUND
STEREO
CINE FLTR
LEVEL+
LEVEL-
L NIGHT
TEST TONE
TX-SR304_En.book Page 35 Tuesday, January 24, 2006 10:01 AM