ONKYO TX-SA705 Guia Do Utilizador
48
First Time Setup
—Continued
HDMI Input Setup
If you connect a video component to HDMI IN, you
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
must assign that input to an input selector. For example,
if you connect your DVD player to HDMI IN 1, you
must assign HDMI IN 1 to the DVD input selector.
If you’ve connected your TV to the AV receiver/AV
amplifier with an HDMI cable, you can set the AV
receiver/AV amplifier so that composite video, S-Video,
and component video sources are upconverted* and out-
put by the HDMI OUT. You can set this for each input
selector by selecting the “- - -” option.
amplifier with an HDMI cable, you can set the AV
receiver/AV amplifier so that composite video, S-Video,
and component video sources are upconverted* and out-
put by the HDMI OUT. You can set this for each input
selector by selecting the “- - -” option.
Notes:
• Each HDMI IN cannot be assigned to more than one
• Each HDMI IN cannot be assigned to more than one
input selector.
• For composite video, S-Video, and component video
upconversion for the HDMI OUT, the HDMI Monitor
setting must be set to Yes (see page 47), and the HDMI
Input setting must be set to “- - -”. See page 27 for
more information on video signal flow and upconver-
sion.
setting must be set to Yes (see page 47), and the HDMI
Input setting must be set to “- - -”. See page 27 for
more information on video signal flow and upconver-
sion.
• When an HDMI IN is assigned to an input selector as
explained here, the digital audio input for that input
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 51.
selector is automatically set to the same HDMI IN.
See “Digital Input Setup” on page 51.
• This procedure can also be performed on the AV
receiver/AV amplifier by using its [SETUP] button,
arrow buttons, and [ENTER] button.
arrow buttons, and [ENTER] button.
Video Input Setup
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “1. Input/Out-
put Assign,” and then press
[ENTER].
The Input/Output Assign menu
appears.
put Assign,” and then press
[ENTER].
The Input/Output Assign menu
appears.
IN
OUT
Composite video, S-Video,
component video
Composite video, S-Video,
component video
HDMI
HDMI
ENTER
ENTER
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component
2. HDMI Input
3. Component
Video Input
4. Digital Input
3
Use the Up and Down [
]/[
]
buttons to select “2. HDMI Input,”
and then press [ENTER].
The HDMI Input menu appears.
and then press [ENTER].
The HDMI Input menu appears.
4
Use the Up and Down [
]/[
]
buttons to select an input selec-
tor, and use the Left and Right
[
tor, and use the Left and Right
[
]/[
] buttons to select:
IN 1: Select if the video component
is connected to HDMI IN 1.
IN 2: Select if the video component
is connected to HDMI IN 2.
IN 3: Select if the video component
is connected to HDMI IN 3.
- - -: Output composite video,
S-Video, and component
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in “Compo-
nent Video Setup” (see
page 49).
video sources from the HDMI
OUT. The video output signal
from the HDMI OUT is the
one configured in “Compo-
nent Video Setup” (see
page 49).
5
Press the [SETUP] button.
The Setup menu closes.
The Setup menu closes.
ENTER
ENTER
1–2. HDMI Input
DVD
- - -
VCR/DVR
- - -
CBL/SAT
- - -
GAME/TV
- - -
AUX
- - -
ENTER
ENTER
TX-SR705_En.book Page 48 Monday, May 28, 2007 2:13 PM