ONKYO TX-SA705 Guia Do Utilizador

84

Note:
• This procedure can also be performed on the AV 

receiver/AV amplifier by using its [SETUP], 
[ENTER], and arrow buttons.

Some DVD players output the LFE channel from their 
subwoofer output at 15 dB higher than normal. You can 
change the subwoofer sensitivity to match your DVD 
player. Note that this setting only affects signals con-
nected to the SUBWOOFER input jack of the multichan-
nel DVD input.

Note:
This procedure can also be performed on the AV 
receiver/AV amplifier by using its [SETUP] button, 
arrow buttons, and [ENTER] button.

buttons to specify the distance 
between your surround back 
speakers:
< 1 ft (< 0.3 m) (Default): Select this if 
your surround back speakers are 
between 0 and 1 foot (0–30 cm) apart.
1–4 ft (0.3–1.2 m): Select this if your 
surround back speakers are between 1 
and 4 feet (0.3–1.2 m) apart.
>4 ft (>1.2 m): Select this if your sur-
round back speakers are more than 4
feet (1.2 m) apart.

Note:
This setting is only available if the Surr 
Back Ch setting in the Speaker Config-
uration is set to 2ch (page 78).

Press the [SETUP] button.
The setup menu closes.

Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.

buttons to select “7. Hardware 
Setup,” and then press [ENTER].
The Hardware Setup menu appears.

buttons to select “4. Analog Mul-
tich,” and then press [ENTER].
The Analog Multich menu appears.

buttons to select a value.
You can select 0 dB, 5 dB, 10 dB, or 
15 dB.
If you find that your subwoofer is too 
loud, try the 10 dB or 15 dB setting.

Press the [SETUP] button.
The setup menu closes.

TX-SR705_En.book  Page 84  Monday, May 28, 2007  2:13 PM