ONKYO TX-SA806 Guia Do Utilizador

35

■ CD Player or Turntable (MM) with Built-in Phono Preamp

• With connection 

, you can listen to and record audio from the CD player and listen in Zone 2.

• To connect the CD player digitally, use connection 

 or 

. (To record or listen in Zone 2 as well, use 

 and 

, 

or  

and .)

■ Turntable (MM) with no Phono Preamp Built-in 
The AV receiver/AV amplifier’s PHONO IN is designed for use 
with a moving magnet (MM) type cartridge.
Use an analog audio cable to connect the AV receiver/AV 
amplifier’s PHONO IN L/R jacks to the audio output on your 
turntable.

Notes:
• If your turntable has a ground wire, connect it to the AV 

receiver/AV amplifier’s GND screw. With some turntables, 
connecting the ground wire may produce an audible hum.
If this happens, disconnect it.

• If your turntable has a moving coil (MC) type cartridge, 

you’ll need a commercially available MC head amp or MC 
transformer. Connect your turntable to the head amp or trans-
former, and connect that to the AV receiver/AV amplifier’s 
PHONO IN L/R jacks.

• You can also use a phono equalizer to connect a turntable 

with an MC-type cartridge. See your phono equalizer’s man-
ual for details.

CD IN L/R

⇐

Analog audio L/R output

DIGITAL COAXIAL IN 2 (VCR/DVR)

⇐

Digital coaxial output

DIGITAL OPTICAL IN 2 (CD)

⇐

Digital optical output

Step 1:
Choose a connection that matches your CD player (

, 

, or 

). Use connection 

 for a turntable with a built-in 

phono preamp.

Connect one 
or the other 
Connection 

 must be 

assigned 
(see page 46)

TX-SR806_En.book  Page 35  Monday, August 4, 2008  10:25 AM