Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ONKYO
  4. TX-SA806
  5. Guia Do Utilizador

ONKYO TX-SA806 Guia Do Utilizador

Download
Página de 124
53
Notes:
• When the automatic speaker setup is complete, the 
“Equalizer Settings” (page 80) will be set to “Audys-
sey
”. 
• You can cancel the automatic speaker setup at any 
point in this procedure simply by disconnecting the 
setup microphone.
6
After the 3rd to the 5th measure-
ment, the following screen 
appears.
Use the Up and Down [
q]/[w] but-
tons to select an option, and then 
press [ENTER].
Next: 
Select “Next” to begin measuring 
the next measurement position.
After the 6th measurement has been 
taken, the procedure automatically 
proceeds to step 7.
Finish(Calculate):
Select this if you don’t want to 
measure any more listening posi-
tions and are ready to calculate the 
results, then go to step 7.
7
When the measurements are 
complete, the following screen 
appears.
8
When the calculations are com-
plete, the following screen 
appears.
Auto Speaker Setup
Select [Next] to measure the next position, 
or select [Finish] to calculate 
the Audyssey MultEQ room EQ solution.
Next
Finish(Calculate)
Auto Speaker Setup
Calculating...
Auto Speaker Setup
Subwoofer : 
 
No
Front 
:  
Full Band
Center : 
None
Surround : 
None
Surr Back 
: 
None
Surr Back Ch 
:  
  - - -
Save
Cancel
Review SP Configuration
Use the Up and Down [
q]/[w] but-
tons to select an option, and then 
press [ENTER].
The options are:
Save: 
Save the calculated settings and exit 
the automatic speaker setup.
Cancel: 
Cancel the automatic speaker setup.
Note:
You can view the calculated settings for 
the speaker configuration, speaker dis-
tances, and speaker levels by using the 
Left and Right [
e]/[r] buttons.
9
If you selected “Save”, the results are 
saved, and the following screen 
appears.
10
Disconnect the speaker setup 
microphone.
Auto Speaker Setup
Saving...
Please, unplug Setup Mic.
Auto Speaker Setup
TX-SR806_En.book  Page 53  Monday, August 4, 2008  10:25 AM