ONKYO TX-SA806 Guia Do Utilizador
56
Basic Operations
This section explains how to select the input source (i.e., the AV component that you want to listen to or watch).
Selecting the Input Source
1
Use the AV receiver/AV amplifier’s input selector buttons to select
the input source.
the input source.
To select the input source with the remote controller, use the
INPUT SELECTOR buttons.
INPUT SELECTOR buttons.
2
Start playback on the source component.
When you select DVD or another video component, on your TV, you’ll need
to select the video input that’s connected to the AV receiver/AV amplifier’s
HDMI OUT, COMPONENT VIDEO MONITOR OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
When you select DVD or another video component, on your TV, you’ll need
to select the video input that’s connected to the AV receiver/AV amplifier’s
HDMI OUT, COMPONENT VIDEO MONITOR OUT or MONITOR OUT.
On some DVD players, you may need to turn on the digital audio output.
3
To adjust the volume, use the MASTER VOLUME control, or the
remote controller’s VOL [
remote controller’s VOL [
q]/[w] button.
The volume can be set to
−
∞
dB,
−
81.5 dB through +18.0 dB (relative dis-
play).
The AV receiver/AV amplifier is designed for home theater enjoyment. It has
a wide volume range, allowing precise adjustment.
The volume level can also be displayed as an absolute value. See “Volume
Setup” on page 91.
The AV receiver/AV amplifier is designed for home theater enjoyment. It has
a wide volume range, allowing precise adjustment.
The volume level can also be displayed as an absolute value. See “Volume
Setup” on page 91.
4
Select a listening mode and enjoy!
See “Using the Listening Modes” on page 64.
See “Using the Listening Modes” on page 64.
1
3
MULTI CH
3
1
MULTI CH
or
Remote
controller
AV receiver/
AV amplifier
AV amplifier
or
AV receiver/
AV amplifier
AV amplifier
Remote
controller
TX-SR806_En.book Page 56 Monday, August 4, 2008 10:25 AM