ONKYO tx-sr706 Manual Suplementar

En-

9

You can check the strength of the SIRIUS Satellite Radio 
signal and adjust the position of the SiriusConnect Home 
antenna accordingly.

Notes:
• So long as the signal strength is good, you can enjoy 

SIRIUS Satellite Radio by using either satellite or ter-
restrial reception.

• Terrestrial signals are only available in certain areas.

• The SIRIUS information on the Satellite Radio screen 

is only displayed when the SAT Radio Mode is set to 
“SIRIUS” or “XM/SIRIUS” (see page 2).

• If you’re using both XM Satellite Radio and SIRIUS 

Satellite Radio and the Satellite mode is set to 
“XM/SIRIUS” (see page 2), signal strength meters for 
both systems appear on the same screen.

Press the [RECEIVER] button, 
followed by the [TUNER] button, 
and [SETUP] button.
The main menu appears onscreen.

q]/[w] but-

tons to select “7. Hardware 
Setup”, and then press [ENTER].
The Hardware Setup menu appears.

Note:
If the SAT Radio Mode is set to “None” 
(see page 2), the “Antenna Aiming” 
item is not available.

q]/[w] but-

tons to select “3. Tuner”, and 
then press [ENTER].
The Tuner screen appears.

q]/[w] but-

tons to select “Antenna Aiming”, 
and then press [ENTER].
The Satellite Radio screen appears.
The name of the currently selected 
input selector is displayed in a box.

If you cannot receive a satellite signal, 
position the SiriusConnect Home 
antenna so that as many bars as possible 
(up to 3) appear on the SIRIUS Terres-
trial signal strength meter.