Elmo dvr v5.01 Manual Do Utilizador
3.6.6. Recording Frame Rate per Camera
Adjust the frame rate value individually for each camera. The sum of fps for all cameras is the maximum fps supported
by the capture board.
by the capture board.
In this example, it is known that the ELMO DVR has 12016 connected cameras. The total fps number cannot exceed 120
fps.
fps.
Increase the fps number for the cameras facing most important locations or locations, where most activity occurs. Increasing
the fps on specific cameras will decrease the fps number on the rest of the cameras in order to preserve the total fps
number.
the fps on specific cameras will decrease the fps number on the rest of the cameras in order to preserve the total fps
number.
Click Default to assign the common denominator fps for all enabled cameras. (E.g. If ELMO DVR has 120xx series
capture board installed, and 12 connected cameras, 10 fps value will be assigned to each camera by default.) All dis-
abled/unavailable cameras will automatically be assigned fps of 0.
capture board installed, and 12 connected cameras, 10 fps value will be assigned to each camera by default.) All dis-
abled/unavailable cameras will automatically be assigned fps of 0.
Note
If the VideoLogix™ is enabled for a specific
camera, the maximum frame rate is 13 fps.
camera, the maximum frame rate is 13 fps.
3.6.7. Recording Frame Rate per Camera - Advanced
Setup
Setup
23
ELMO DVR User Manual v5.01
Motion Setup
ELMO DVR Server
XML to PDF by RenderX XEP XSL-FO Formatter, visit us at