Elmo dvr v5.01 Manual Do Utilizador

d. Set the minimum angle of the TILT based on the value you placed in the Start Position .

e. Click Screen Value to get the current minimum value of the TILT .

f. Click Enable to let the camera move within the value of the angle.

7. Define On/Off Time

a. Set the time for which to activate the Motion Tracking function. The default value is 00:00 ~ 00:00.

The camera works in PAN/TILT mode outside of the configured time.

b. Click Disable PTZ Mode : to disable PTZ mode from the motion tracking camera. If you don't select this

option, both motion tracking and PTZ will be used.

Note

Using the PTZ controls will stop the motion
tracking. This is the reason for Disable PTZ.

8. Define the Set Values

a. Adjust the PAN Angle to set the value when the selection box is not in correct range.

b. Adjust the Tilt Angle to set the value when the selection box is higher or lower than the position chosen.

c. Increase or decrease the Sensitivity of the camera movement. You will need to adjust this value properly

depending on the location. Note that motion tracking may become sensitive to light, and may shift a little.

d. Enabling Camera Flip will allow a PAN/TILT camera to maintain an upright viewing position. For example,

the image will not be inverted.

Related Topics: Motion Detection | Intelli-Guard™

3.23. VideoLogix™ Setup

3.23.1. Overview

VideoLogix™ is an intelligent human(vehicle) tracking/theft detection module developed exclusively by ELMO USA CORP.
This module allows:

1. Detecting Human Presence

2. Detecting a Vehicle

3. Detecting Missing Object

4. Analyzing Human/Vehicle behaviour

5. Initializing pre-selected response depending on the nature of the behaviour

To use VideoLogix™ module, your system must meet the following requirements:

For 1 channel of VideoLogix™:

• CPU: Pentium 4, 2.4 GHz or above

• RAM: 512 MB

• OS: Windows XP Pro

For 4 channels of VideoLogix™:

ELMO DVR User Manual v5.01

VideoLogix™ Setup

ELMO DVR Server