Samsung dvd-e2424 Guia Do Utilizador

48

49

With the unit in Stop mode, press the MENU button.

Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.

Select Audio Setup using UP/DOWN buttons, then
press the RIGHT or ENTER button.

Use the UP/DOWN buttons to select the desired
item. Then press the RIGHT or ENTER button.

• How to make the SETUP menu disappear or return to menu screen during set up; 

Press RETURN or LEFT button.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

1
2

3

4

1. PCM : 
Converts to PCM(2CH) audio. 
Select PCM when using the Analog 
Audio Outputs.
2. Bitstream : 
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the 
Digital Audio Output.

1. PCM :
Converts to PCM(2CH) audio. 
Select PCM when using the Analog Audio Outputs.
2. Bitstream : 
Converts to Dolby Digital Bitstream (5.1CH). 
Select Bitstream when using the Digital Audio Output.

• Be sure to select the correct Digital Output 

or no audio will be heard.

• When Multi Channel Output select Digital.

Dolby&MPEG-2 Digital Out works.

1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only. 

Select DTS when connecting to a DTS Decoder.

1. On : To select dynamic compression.
2. Off : To select the standard range.

1. On : Select this when the amplifier connected to the player is not 96KHz compatible. 

In this case, the 96KHz signals will be down converted to 48KHZ.

2. Off : Select this when the amplifier connected to the player is 96KHz compatible. 

In this case, all signals will be output without any changes.

Multi Channel Output (DVD-E2828K only)

1. 

Digital 

: Select this when using the multichannel digital audio output.

2. Analog  : Select this when using the multichannel analog audio output.

With the unit in Stop mode, press the MENU button.

Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.   

Select Language Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button. 

Select Audio using UP/DOWN buttons, then press
the RIGHT or ENTER button.

Press the UP/DOWN buttons to select ‘English’ .

- Select “Original” if you want the default soundtrack language to

be the original language the disc is recorded in.

- Select “Others” if the language you want is not listed.

Press the ENTER button.

- English is selected and the screen returns to SETUP menu.

With the unit in Stop mode, press the MENU button.

Select Setup using UP/DOWN buttons, then RIGHT
or ENTER button.  

Select Language Setup using UP/DOWN buttons,
then press the RIGHT or ENTER button. 

Select Subtitle using UP/DOWN buttons, then press
the RIGHT or ENTER button.

Use the UP/DOWN buttons to select ‘English’.

- Select “Automatic” if you want the subtitle language to be the

same as the language selected as the audio preference.

- Select “Others” if the language you want is not listed. 

Some discs may not contain the language you  select as 
your initial language; in that case the disc will use its     
original language setting.

Press the ENTER button.

- English is selected and the screen returns to SETUP menu.

• If the selected language is not

recorded on the disc, the original
pre-recorded language is selected.

• How to make the SETUP menu

disappear or return to menu screen
during set up; Press RETURN or
LEFT button.

1
2
3

5

4

6

1
2

3
4
5

6

Speaker Setup (DVD-E2828K only)

DVD-E2424(00141R)gb-2  2/9/03 11:32 AM  Page 48