Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Samsung
  4. dvd-v4600
  5. Guia Do Utilizador

Samsung dvd-v4600 Guia Do Utilizador

Download
Página de 36
Digital Output 
If your A/V receiver is equipped with a Dolby Digital 
decoder, your DVD-VCR can output Dolby Digital 5.1 
sound, but you MUST enable this feature in the menu 
system to prevent damage to your speakers. 
NOTE: Select “Bitstream” ONLY if you have connected 
a Dolby Digital-equipped A/V receiver to the 
Digital Output (coaxial) on the DVD-VCR rear 
panel. 
1  Open “MENU” 
Press the MENU button while the DVD is in Stop 
mode. 
2  Select “DVD” 
Use the UP/DOWN buttons to highlight “DVD” 
then press the ENTER button. 
3  Select “Audio” 
Highlight “Audio”, then press the ENTER button. 
4  Set “Digital Output” 
Highlight “Digital Output” then press the RIGHT 
button to select one of the following options: 
• PCM – 
To use your DVD/TV with an A/V 
receiver without a Dolby Digital 
decoder. 
• Bitstream –To use your DVD/TV with an A/V 
receiver with a Dolby Digital decoder. 
PCM Down Sampling 
               :  On 
PCM 
Bitstream 
DTS
If your A/V receiver is equipped with a DTS decoder, 
your DVD-VCR can output DTS digital sound, but you 
MUST enable this feature in the menu system. 
NOTE: Select “On” ONLY if you have connected a 
DTS-equipped A/V receiver to the Digital audio 
Out (coaxial) on the DVD-VCR rear panel. 
1  Open “MENU” 
Press the MENU button while the DVD is in Stop 
mode. 
2  Select “DVD” 
Use the UP/DOWN buttons to highlight “DVD” 
then press the ENTER button. 
3  Select “Audio” 
Highlight “Audio”, then press the ENTER button. 
4  Set “DTS” 
Highlight  “DTS”  then press the RIGHT button to 
select one of the following options: 
•   Off –  To use your DVD/TV with an A/V receiver 
NOT equipped with a DTS decoder. 
•  On –  To use your DVD/TV with an A/V receiver 
equipped with a DTS decoder 
PCM Down Sampling 
               :  On 
Off 
On 
ENG-16