Samsung dvd-v4600 Guia Do Utilizador

Página de 36
Parental 
Rating Control is a password protected system that 
allows you to block playback of DVDs based on their 
content. The system uses an eight level rating system. 
•  If you try to play a DVD that exceeds the selected 
rating, an error message will appear. 
•  Not all discs are rated. 
1  Open “MENU” 
Press the MENU button while the DVD is in Stop 
mode. 
2  Select “DVD” 
Use the UP/DOWN buttons to highlight “DVD ” 
then press the ENTER button. 
3  Select “Parental” 
Highlight “Parental”, then press the ENTER button. 
4  Select “Use Password” 
Press the RIGHT button to select one of the 
following options: 
• No - No password is necessary to view a DVD or 
to change the  Rating Level. No additional 
settings are necessary. 
• Yes - A password is necessary to view a DVD and 
to view the Rating Level. The menu will 
change as shown. 
NOTES: 
• The first time “Use Password” is set to “No,” 
you will be prompted to enter a new password. 
• If the “Enter Password” screen appears, then 
“Use Password” has already been set to 
“Yes.” Please skip to Step 6. 
• There is no default password. 
No 
5  Enter Password 
Use the numeric buttons (0-9) on the remote 
control to enter the 4-digit password. 
• Write your password down, and keep it in a safe 
place in case you need to change your settings 
later. 
6  Select “Rating Level” 
Move the selection bar to “Rating Level,” then 
press ENTER to select. 
0~9 
Yes 
7  Change Rating Level 
Use the UP/DOWN buttons to select one of the 
following ratings: 
•  Level 8 Adult 
•  Level 4 
•  Level 7 
•  Level 3 
•  Level 6 
•  Level 2 
•  Level 5 
•  Level 1 Kids Safe 
All ratings above the level you select will also be
blocked, e.g., if you select Level 6, then Levels 7
and 8 will also be blocked.
Press Enter to confirm your selection.
• If you forgot your password, press power on from 
a cold start with no disc in the unit. Press the REW 
and F.F buttons simultaneously on the front panel 
for 5 seconds. The “Reset Ok” message will appear. 
Press the POWER button. 
ENG-20