Samsung DVD-VR300 Manual Do Utilizador
R
ecording
Recording through a DV
jack
jack
Connect the DV output jack of your camcorder to
the DV input jack on the front of your DVD
Recorder-VCR using a DV cable.
the DV input jack on the front of your DVD
Recorder-VCR using a DV cable.
1
Power on your DVD Recorder-VCR and switch to
DV mode by pressing the INPUT SEL. on the
remote.
DV mode by pressing the INPUT SEL. on the
remote.
2
With your DVD Recorder-VCR stopped, set the
operation mode of your camcorder to play mode.
operation mode of your camcorder to play mode.
3
Press the REC button on your DVD Recorder-VCR
when the image from which you want to start
recording is displayed.
when the image from which you want to start
recording is displayed.
4
Press the STOP button on your DVD Recorder-VCR
when the recording is finished.
when the recording is finished.
5
Follow these directions to record onto a disc or tape the
outputs of a camcorder that has a DV output jack.
outputs of a camcorder that has a DV output jack.
Some camcorders may not work with your DVD
Recorder-VCR even if they have a DV output jack.
Recorder-VCR even if they have a DV output jack.
Also refer to the user manual for your camcorder
when recording through a DV jack.
Note
Start Recording
Press the REC button on the remote control or front
panel.
panel.
For options while recording is in progress, see
“Special Recording Features”.
3
Basic VCR Recording
Insert Tape
Insert a blank VHS tape into the VCR deck.
• Make sure the tape is long enough to record the
entire program.
To change the Recording Speed, see page 67.
To change the Recording Speed, see page 67.
1
Select a Channel to Record
Use the 0–9 buttons or the Channel UP/DOWN
arrow buttons to select the desired channel, or press
the INPUT SEL. button to select Line 1, Line 2 or
DV if recording from an external device connected
to the front or rear Line inputs, respectively.
arrow buttons to select the desired channel, or press
the INPUT SEL. button to select Line 1, Line 2 or
DV if recording from an external device connected
to the front or rear Line inputs, respectively.
2
Before starting
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
1. Check TV channel and Antenna connections.
2. Check the remaining time on the tape.
You can record a TV show in progress by inserting a blank
tape and pressing the (REC) button. You can even add
time in 30-minute increments up to 4 hours by pressing the
tape and pressing the (REC) button. You can even add
time in 30-minute increments up to 4 hours by pressing the
(REC)button repeatedly; see page 61.
Be sure your videotape has a Record Safety Tab. If
the tab is missing, you can cover the opening with
a small piece of tape. Warning: Do not cover this
opening unless you are sure you want to record
over the tape.
a small piece of tape. Warning: Do not cover this
opening unless you are sure you want to record
over the tape.
Note
66 - English
Pause/Resume Recording
Press the (REC/PAUSE) button.
Press (REC) again to resume.
Press (REC) again to resume.
4
Stop Recording
Press the (STOP) button.
5