Samsung CLP-650 Guia Do Utilizador

Solving Problems

7.9

If paper is jammed in the optional Tray2, a lamp turns on at the 
corresponding location on the Status map. Also, “Jam0 In 

Tray2” appears on the display.

Using the handle, completely open the access door.

Open the top cover.

:

• Do not touch the fuser inside the inner cover. It is hot and 

could cause burns! The fuser’s operating temperature is 
180°C (356°F). Take care when removing paper from the 
printer.

• Do not touch the green surface, the OPC drum, on the front 

of each toner cartridge with your hands or any other 
material. Use the handle on each cartridge in order to avoid 

touching this area.

• Be careful not to scratch the surface of the paper transfer 

belt.

• If you leave the access door open for more than a few 

minutes, the OPC drum can be exposed to light. This will 
cause damage to the OPC drum. Close the access door 

should the installation need to be halted for any reason.

Push the levers up. 

Open the inner cover using the handle on it and carefully
take the jammed paper out of the printer.

Close the inner cover and push the levers down. Go to step 

If you cannot find the jammed paper, or if there is any 
resistance removing the paper, stop pulling and close the 

access door. Go to step 6.