Samsung NV10 Manual Do Utilizador
《
12
》
Connecting to a Power Source
■
Charging LED of the AC Adapter
Charging LED
Being Charged
Red LED is on
Charging is complete
Green LED is on
Charging error
Red LED is off or blinking
●
Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
insert by force. It may cause breakage of cable or camera.
●
If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
●
If you charge the battery with the camera power on, the battery can't charge
fully. Turn the camera off while charging the battery.
fully. Turn the camera off while charging the battery.
●
If you insert the fully discharged battery to charge it, do not turn on the
camera at the same time. The camera may not be turned on because of the
low battery capacity. Charge the battery for more than 10 minutes before
using the camera.
camera at the same time. The camera may not be turned on because of the
low battery capacity. Charge the battery for more than 10 minutes before
using the camera.
●
Do not use the flash frequently or take a movie clip with a fully discharged
battery that has only been charged for a short time.
battery that has only been charged for a short time.
CAUTION
■
You can charge the rechargeable battery (SLB-0837B) by using the cradle.
When you charge the battery with the cradle, you only can use Lithium Ion
battery pack (SLB-0837B).
When you charge the battery with the cradle, you only can use Lithium Ion
battery pack (SLB-0837B).
■
How to charge the rechargeable battery (SLB-0837B)
●
Charging with the cradle
●
Charging with the camera
Charging LED
Being discharged
(Using the AC adapter)
Orange coloured LED is on