Samsung 150n 151n 152n 153t 170n 171n 172n 173n 173t 174t 191n {191t plus} 192n 193n 193t Guia Do Utilizador

Connecting 
Your Monitor

Installing the 
Monitor Driver
Installing VESA 
compliant mounting

 

 

 

 

Connect the power cord for your monitor to the power port on the back of the monitor. Plug the 
power cord for the monitor into a nearby outlet.

Using the D-sub (Analogue) connector on the video card.  
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 

Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the DVI Port on the back of your Monitor. 

Connected to a Macintosh. 
Connect the monitor to the Macintosh computer using the D-SUB connection cable.

In the case of an old model Macintosh, you need to connect the monitor using a special Mac 
adaptor.

Turn on your computer and monitor. If your monitor displays an image, installation is complete.

You may get a blank screen depending on the type of video card you are using, if you connect 
simultaneously both the D-sub and DVI cables to one computer.

If you connect properly your monitor using the DVI connector but get a blank or fuzzy screen, 
check to see if the monitor status is set to analogue. Press Source button to have the monitor 
double-check the input signal source.