Infocus 8602 Guia Do Utilizador

Displaying an image

Touch the Power button on the keypad or the remote.

The Power button blinks green and the fans start to run. When the lamp

turns on, the start up screen will display and the Power button will become

solid green. It can take a minute for the image to achieve full brightness.

No start up screen?

Get help on page 16.

Turn on your computer or video device.

The image should appear on the projection screen. If it doesn’t, press the

Source

button on the projector’s keypad or remote.

If you are using a VGA cable to connect your computer to the projector:

If using a laptop, make sure its external video port is active.

Many laptops do not automatically turn on their external video port when a

projector is connected. Usually a key combination like Fn + F8 or CRT/LCD

key turns the external display on and off. Locate a function key labeled

CRT/LCD or a function key with a monitor symbol. Press Fn and the

labeled function key simultaneously.

Refer to your laptop’s documentation for more information about your

laptop’s key combination or go to the InFocus website at: http://
www.infocus.com/Support/LaptopActivation.aspx

No laptop image?

Try pressing the Auto Image button on the keypad or

remote.

horizontal

vertical

zoom

focus

Press Power button

Turn on computer or video
device

Activate laptop’s external port

Monitor key or
LCD/CRT key

Fn key