ICOM ic-207h Manual De Instruções

7

34

■ Calling up a call channel

Each band has an independent call channel to store a most-
often-used frequency for quick recall.

➀

Push [BAND] one or more times to select a band, if nec-
essary.

➁

Push [M/CALL] once or twice to display a large “C” in the
memory channel readout.

• While a call channel is displayed, pushing [BAND] toggles be-

tween the 2 call channels.

➂

Push [V/MHz] or [M/CALL] to exit the call channel.

Ä

Push [BAND] to select the desired band, if nec-
essary.

Å

Push [

(MR)

CALL] for 1 sec. to select the call

channel.

Ç

Push [BAND] to toggle between the 2 call
channels.

■ Transferring call channel

➀

Push [BAND] to select a band, if necessary.

➁

Select the call channel by pushing [M/CALL] once or twice.

• “C1” or “C2” appears—push [BAND] to toggle between them.

➂

Push [S.MW] momentarily, then rotate the tuning dial to se-
lect another memory channel to transfer.

• To transfer to the VFO, push and hold [

(S.MW)

MW] instead of

pushing momentarily.

➃

Push and hold [

(S.MW)

MW] to transfer when a momentary

push was used in the previous step.

Ä

Push [BAND] to select the desired band, if nec-
essary.

Å

Push [

(MR)

CALL] for 1 sec. to select a call

channel, then push [BAND] to select the other
call channel, if desired.

Ç

Push [FUNC], then [EMW] momentarily.

• To transfer to the VFO, push [FUNC] then [EMW] in-

stead of pushing [EMW] momentarily.

É

Push [FUNC] then [EMW] for 1 sec. to transfer
when momentarily pushing [EMW] in step Ç.

Large “C” shows a call 
channel is selected.

Small “c” shows VFO mode 
was selected from a call 
channel.

CALL

MW

A