Olympus c-725 ultra zoom Manual De Introdução
104
Chapter 7
1
Make sure that the TV and camera power are off .
2
Connect the camera to the TV using the video cable.
3
Set the mode dial to
and press the POWER switch. Turn on the
TV. Set the TV to the video input mode.
● For details on switching to video input, refer to your TV's instruction
● For details on switching to video input, refer to your TV's instruction
manual.
4
Select an image by using the arrow pad.
● The selected image will be displayed on the TV.
● The selected image will be displayed on the TV.
Playback on a TV
Use the provided video cable to play back recorded images on your TV.
Connect to the TV's video
input (yellow) terminal
input (yellow) terminal
Video cable
Connect to the
VIDEO OUT jack.
VIDEO OUT jack.
● The optional AC adapter is recommended when using the camera
with a TV.
● Video signal is either NTSC or PAL compatible depending on the
standard in the intended area of distribution.
TIPS
Mode dial
setting
setting
● The camera’s monitor turns off automatically when the camera is connected
to a TV.
● The image may appear off-center on the TV screen. This is due to the TV's
adjustment settings.
● When images are compressed in order to fit the entire image on a TV
screen, a black frame is placed in the blank parts of the screen around the
image. If the image is output to a video printer via the TV, the black frame
may be printed.
image. If the image is output to a video printer via the TV, the black frame
may be printed.
Note