PowerDsine 6548 Manual Do Utilizador
PD-6548
Power over Ethernet Solutions
12
Cat. No.: 06-6860-056
2.3 Indicators
A set of indicators provide the status of the Power over Ethernet Midspan and
its ports. Refer to Table 2-1 and Table 2-2 for status information during
operation.
its ports. Refer to Table 2-1 and Table 2-2 for status information during
operation.
2.3.1
Primary Power Indicators
A Primary Power LED (labled “AC”) is located on the front panel; the LED
provides Power over Ethernet Midspan power status.
provides Power over Ethernet Midspan power status.
When the indicator illuminates in green, it means that the Midspan receives
AC power. The “AC” indicator lits in orange to indicate Built In test failure.
Refer to Table 2-1: for additional information.
AC power. The “AC” indicator lits in orange to indicate Built In test failure.
Refer to Table 2-1: for additional information.
2.3.2 Port
Indicators
One uni-color indicator (green) per port provides port status:
Green indicates that the PD (Powered Device)
is identified as "Power over Ethernet Enabled",
is active and receives power.
is active and receives power.
Blinking green indicates that the power is not
delivered to a specific port.
Refer to Table 2-1 and Table 2-2 for additional information.
Note
Due to the standard detection process performed on
each PoE port, power is not supplied to an Ethernet
device that is not PoE-enabled. In this way, PDs (non
PoE -enabled) are not affected by connection to
Midspan’s output port.
each PoE port, power is not supplied to an Ethernet
device that is not PoE-enabled. In this way, PDs (non
PoE -enabled) are not affected by connection to
Midspan’s output port.