Contour roam2 Guia Do Utilizador

3

ContourROAM User Manual

+ microSD CARD 
You will need to purchase a microSD storage card. The ContourROAM is 

compatible with:

- SDSC (standard capacity) microSD Cards up to a capacity of 2GB.
- SDHC (high capacity) class 4, 6, or 10 microSD Cards up to a  

maximum capacity of 32GB.

All microSD Cards must be formatted before use in the ContourROAM 

camera. Follow the directions below.

1. Insert the microSD Card. To remove microSD Card, push card in to release.
2. Using the end of a pen or paper clip, firmly depress the Format Button  

(See “J” on page 1) and hold it down until the LEDs are on. 

3. The Memory Status LED will show yellow throughout the format 

operation. This should take no longer than 10 seconds.

4. When the formatting process is complete, the camera will beep twice. 

The Status LEDs will light and the Memory Status LED will be green, 

showing the microSD Card is ready.

Note: All existing data on microSD Card will be lost during the reformat process.