Avaya a500 Guia Do Utilizador

admin Commands

Cajun A500 ATM Switch User Guide

 6-7

The 

admin changeboot

 command enables you to set the boot source for the Cajun 

A500. You can specify the boot source as either the PCMCIA card or the FLASH. It may 

be necessary to obtain and load a new software image for an Cajun A500. This may be 

necessary because:

U A Switch Processor module has been replaced, and the pre-existing software 

version and PCMCIA card are not available.

U A new software version has been made available and needs to be installed for 

proper operation.

admin changeboot { bootdevName } { bootfileName }

This command requires the following argument(s):

A500: admin changeboot PCMCIA: SWP_IMAGE.IMG

Updating NVRAM boot source : [PCMCIA:] [SWP_IMAGE.IMG]

NVRAM boot source: Boot device [PCMCIA:] file [SWP_IMAGE.IMG]

bootdevName

Specifies the boot source. This can be either PCMCIA: or FLASH:

bootfileName

specifies the boot image file. This is SWP_IMAGE.IMG