Avaya P550 Guia De Referência
OSPF
10-26
Cajun P550/P220 Command Line Interface Reference Guide
. . *
To set the router-id for the system, use the ip ospf router-id command. Use the no form
of this command, to Revert to the system default (the lowest IP address configured on
the system).
of this command, to Revert to the system default (the lowest IP address configured on
the system).
Note:
OSPF must be disabled for this command to take effect. If OSPF is enable on
the system the change will not take effect until OSPF is stopped and started
again.
again.
Command Syntax
Table 10-19.
Parameters, Keywords, Arguments
To Enable:
ip ospf router-id <router-id>
To Disable:
[no] ip ospf router-id <router-id>
Name
Definition
router-id
IP address that represents the router-id for the
system.
system.