Avaya P550 Guia De Referência
Appletalk
Cajun P550/P220 Command Line Interface Reference Guide
3-13
.. *
Create an appletalk static route. The no form of this command removes the static route
itself, or only removes a zone from the static route if the zone name is supplied.
itself, or only removes a zone from the static route if the zone name is supplied.
Table 3-8.
Parameters, Keywords, Arguments
To Enable:
appletalk static cable-range <cable-range> to
<network.node> [floating] zone <zone-name>
To Disable:
[no] appletalk static cable-range <cable-range> to
<network.node>
Name
Definition
cable-range
The range of Appletalk network values to be used for
this static route. Specify start and end values, in
decimal, between 0 and 65279 and separate the
values with a hyphen.
this static route. Specify start and end values, in
decimal, between 0 and 65279 and separate the
values with a hyphen.
The starting network number must be less than the
ending network number. The next hop appletalk
router is specified via the network.node parameter.
ending network number. The next hop appletalk
router is specified via the network.node parameter.
network.node
Specifies the Appletalk Network Address of the next
hop to the destination network. (Both numbers are
in decimal.)
hop to the destination network. (Both numbers are
in decimal.)
• network - A 16-bit network number between 0
and 66279.
• node - An 8-bit node number between 0 and
254.