Avaya 4621SW Guia Do Utilizador

1. Press the Hold (

) button.

The active call is automatically put on hold. The display area shows an associated HELD 
softkey on the right side of the display area.

2. Press a Line/Feature ( ) button to obtain the dial tone. Place and conclude the new call.

3. To retrieve the held call, select the HELD softkey that corresponds to the held line.

There may be a slight delay before the call becomes active again.

Occasionally someone might call you while you are engaged in an active call. If this happens, 
you will be alerted to the incoming call by the Message Waiting indicator, which begins to flash. 
In addition, a ringing (

) icon will be displayed in the display area beside one of the Line/

Feature ( ) buttons. You can put the active call on hold while you answer the incoming call. 

1. When information about an incoming call appears in the display area, select the Line/

Feature ( ) button that corresponds to the incoming call.

The active call is automatically put on hold. The display area shows an associated HELD 
softkey on the right side of the display area.

2. Conduct and conclude the new call.

3. To retrieve the held call, select the HELD softkey that corresponds to the held line.

There may be a slight delay before the call becomes active again.

You can create a conference call with three participants. One of the other participants can, in 
turn, add one or two additional participants to the conference call. To ensure optimum 
performance, a maximum of five parties per conference call is recommended. 

Note:

If one of the conference-call participants has a SIP phone with "music on hold" 
enabled, it is possible for that party to interrupt the conversation of any of the P2P 
participants with music (or another disruptive sound) by putting P2P participants 
on hold. If this happens, you may optionally choose to drop the telephone that is 
playing music on hold.