Avaya 4621SW Guia Do Utilizador
Viewing and Modifying User Options
Avaya one-X Quick Edition Release 2.0.0 Telephone User Guide
July 2006
81
6. At the remote office, configure a VPN tunnel to the company one-X Quick Edition network.
Refer to the manufacturer’s documentation to configure the VPN. Ask your LAN
administrator to configure complementary VPN settings at the company office to enable
access to the one-X Quick Edition network.
administrator to configure complementary VPN settings at the company office to enable
access to the one-X Quick Edition network.
7. Verify that the VPN tunnel is operational. For example, if the one-X Quick Edition network
and certain company resources (such as a file server or web server) both use the same
network address space, use a client application at the remote office (for example, an FTP
client or web browser) to access the company file server or web server.
network address space, use a client application at the remote office (for example, an FTP
client or web browser) to access the company file server or web server.
8. At the remote office, connect the Teleworker client telephone to the local LAN.
Note:
Note:
The LAN at the remote office must be equipped with a router that forwards traffic
to the one-X Quick Edition network through a VPN tunnel.
to the one-X Quick Edition network through a VPN tunnel.
The Teleworker client telephone at the remote office attempts to connect to one of the
devices on the one-X Quick Edition network to establish a Teleworker session. You can
view the status of the connection in the display area of the Teleworker client telephone.
The information is updated dynamically as the connection status changes. For more
information, see
devices on the one-X Quick Edition network to establish a Teleworker session. You can
view the status of the connection in the display area of the Teleworker client telephone.
The information is updated dynamically as the connection status changes. For more
information, see
One of the Quick Edition IP Telephones or G10 PSTN gateways on the one-X Quick
Edition network will act as a Teleworker server to authenticate the Teleworker client and
establish the session. After a session has been established, the Teleworker client
telephone operates as if it were connected to the one-X Quick Edition network directly.
Edition network will act as a Teleworker server to authenticate the Teleworker client and
establish the session. After a session has been established, the Teleworker client
telephone operates as if it were connected to the one-X Quick Edition network directly.
To enable or disable Teleworker mode on a Quick Edition IP Telephone
1. At the Telephone that you want to use as a Teleworker client, access the User Options
.
Tip:
Tip:
If a computer is connected to the local one-X Quick Edition network, you can use
the web browser on the computer to enable the Teleworker Application on the
Telephone instead of following this procedure. For more information about the
web-based options, see
the web browser on the computer to enable the Teleworker Application on the
Telephone instead of following this procedure. For more information about the
web-based options, see
.
2. Select Teleworker on the User Options menu, or press 9 on the dialpad.
3. Select Mode on the Teleworker menu, or press 1 on the dialpad.
●
When Local is displayed, Teleworker mode is disabled.
●
When Teleworker is displayed, Teleworker mode is enabled.
4. Select the Chg softkey to enable or disable Teleworker mode.
5. Select the Exit softkey to display the previous menu, or press the Phone/Exit (
) button
to clear the display area.