Avaya 4621SW Guia Do Utilizador

4. Select the Chg softkey and enter the IP address. Press the . softkey to add separator 

characters between the digits.

5. Select the Exit softkey to display the previous menu, or press the Phone/Exit (

) button 

to clear the display area.

You can add a Teleworker client telephone to the one-X Quick Edition network without first 
connecting the Telephone to the one-X Quick Edition network and configuring the Telephone 
directly. A high-level summary of the configuration steps are given below:

1. Select a Quick Edition IP Telephone for the remote office. The Telephone does not require 

factory configured settings.

2. Move the Telephone to the remote office.

3. At the remote office, connect the Telephone to the local LAN.

Note:

The LAN at the remote office must be equipped with a router that forwards traffic 
to the one-X Quick Edition network through a VPN tunnel.

4. After the Telephone initializes and a name has been assigned to the Telephone (if the 

Telephone is in a factory configured state, you will also have to assign a site name), make 
a note of its MAC address (see 

). This information is needed to add configuration settings to the one-X Quick 

Edition network (see Step 

).

5. At the remote office, configure a VPN tunnel to the one-X Quick Edition network. Refer to 

the manufacturer’s documentation to configure the VPN. Ask your LAN administrator to 
configure complementary VPN settings at the company office to enable access to the 
one-X Quick Edition network. 

6. Verify that the VPN tunnel is operational. For example, if the one-X Quick Edition network 

and certain company resources (such as a file server or web server) both use the same 
network address space, use a client application at the remote office (for example, an FTP 
client or web browser) to access the company file server or web server.

7. Ensure that all Quick Edition IP Telephones and G10 PSTN gateways making up the 

existing one-X Quick Edition network are connected to the network, and that they are 
operational.

8. Using the web-based administration interface to the one-X Quick Edition network, add 

configuration information for the remote Teleworker client telephone to the system setup 
(see 

9. At the remote office, configure the Teleworker client telephone to connect to a Teleworker 

server host (see