Avaya callmaster iv Instrução De Instalação

Installation

Issue  5   August 2005

4

NOTE:
The cards and covers are shipped as loose items with the CALLMASTER IV 
voice terminal.

1. Make sure that the voice terminal is right side up.

2. Type or write the numbers/features on the button designation cards with the 

appropriate button information.See 

3. Crease the perforated edges of the button designation cards and then 

remove the cards.

4. If the clear plastic card cover has already been installed on the voice 

terminal, remove the cover on the right side of the CALLMASTER IV by 
gently lifting the plastic cover, with your fingernail, at the slot on the right of 
the set (for the card on the right).

5. If the plastic card cover has not been previously installed on your 

CALLMASTER IV, go on to the next step.

NOTE:
If you need to remove the clear card cover on the left side of the set, gently 
lift the plastic cover, with your fingernail, at the slot on the left of the set.

6. Place the designation card that you have filled out over the buttons, and 

then replace the clear cover by gently bending the cover so that the tabs at 
the top and bottom end of the cover can be inserted into the corresponding 
slots on the housing of the voice terminal. See