Avaya bis 10 Guia De Referência
OFTEN USED FEATURES
Do Not Disturb
To program:
1.
Label a button.
2.
Slide T/P switch to P.
3.
Press labeled button.
4.
Dial
✱
47.
5.
Slide T/P switch to center.
To use:
●
Toggle the programmed
button on and off.
Last Number Dial
To program:
1.
Label a button.
2.
Slide T/P switch to P.
3.
Press button to be programmed.
4.
Dial
✱
84.
5.
Slide T/P switch to center.
To use:
1.
Press the same type of
button used to place the
button used to place the
first call, (for example,
ICOM or SA).
ICOM or SA).
2.
Press programmed button,
or press Feature or # and
dial 84. (Before using # sign,
you must lift handset.)
or press Feature or # and
dial 84. (Before using # sign,
you must lift handset.)
Saved Number Dial
To program:
1.
Label a button.
2.
Slide T/P switch to P.
3.
Press button to be programmed.
4.
Dial
✱
85.
5.
Slide T/P switch to center.
To save and redial:
1.
Press programmed button
before hanging up.
before hanging up.
2.
To redial call, press same
type of button used to
type of button used to
place the call ( lCOM or SA ).
3.
Press programmed button.
Paging
To program speakerphone
paging button:
1.
Label a button as Group
Page-(name) or Page All.
Page-(name) or Page All.
2.
Slide T/P switch to P.
3.
Press labeled button.
4.
Dial
✱
22 and Group Page
or Page All extension.
5.
Slide T/P switch to center.
To use speakerphone paging:
1.
Press an ICOM or SA
button.
button.
2.
Lift handset.
3.
Press programmed button
or dial company-provided
Group Page or Page All
number.
or dial company-provided
Group Page or Page All
number.
4.
Make announcement
after beep.
after beep.
To use loudspeaker paging:
1.
2.
3.
4.
Lift handset.
Press programmed button,
or press Feature and dial
9 and Loudspeaker Page
or press Feature and dial
9 and Loudspeaker Page
line number.
Dial code for company-
defined zone if necessary.
defined zone if necessary.
Make announcement.
Coverage
For
coverage, a co-worker
must program an individual
coverage button on his/her
phone for either primary or
secondary coverage.
(Secondary coverage offers a
two ring delay so you may
answer before calls are
covered. Primary coverage
sends the call irnmediately to
coverage.) You can program
coverage button on his/her
phone for either primary or
secondary coverage.
(Secondary coverage offers a
two ring delay so you may
answer before calls are
covered. Primary coverage
sends the call irnmediately to
coverage.) You can program
buttons for Coverage Off or
Coverage VMS Off. To prevent
coverage of inside or inside
outside calls, use the following
procedure:
Coverage VMS Off. To prevent
coverage of inside or inside
outside calls, use the following
procedure:
To program which calls are
covered:
1.
Slide T/P switch to P.
2. Press an ICOM or SA
button.
3. Dial
✱✱
48 for
outside-only calls, or
dial
✱
48 for both
inside and outside calls.
4. Slide T/P switch to
center.
To program a Coverage OFF
button or a Coverage VMS
OFF button:
1.
Label a button.
2.
Slide T/P switch to P.
3.
Press labeled button.
4.
Dial
✱
49 for Coverage
Off or
✱
46 for Coverage
VMS Off.
5.
Slide T/P switch to
center.
center.
To use buttons:
●
Toggle On the
Coverage VMS OFF
button to prevent outside
calls from being sent to
voice mail.
calls from being sent to
voice mail.
●
Toggle On the
Coverage OFF button
to stop all calls from
Coverage OFF button
to stop all calls from
being sent to
coverage.
coverage.