Avaya 1603SW Guia Do Utilizador

5. Enter the IP netmask followed by the # button.

The telephone displays:

where nnn.nnn.nnn.nnn is the current system value of the HTTP/HTTPS server IP 
address.

6. Enter the File server followed by the # button.

The telephone displays one of the following texts, depending on the current setting of the 
system parameter NVL2Q (802.1Q):

7. Press * to change 802.1Q to the next sequential value. For example, if the current value is 0 

(auto) pressing * changes it to 1 (on) and if the current value is 2 (off), pressing * changes it 
to 0 (auto).

The display is updated to show the current status of 802.1Q.

8. Press the # button to continue the procedure without changing the displayed status of 

802.1Q

The telephone displays the following text:

where dddd is the current system value of the 802.1 VLAN ID.

9. Enter a valid value between 0 and 4094 for the new value of the 802.1 VLAN ID.

The telephone displays the following message:

where ddd is the number of seconds to wait for a DHCPOFFER on a non-zero VLAN.

New=_ 

If NVL2Q is 0:

*=change #=OK 

If NVL2Q is 1:

*=change #=OK 

If NVL2Q is 2:

*=change #=OK 

New=_ 

New=_