Avaya 1603SW Guia Do Utilizador

Perform a network assessment to ensure that the network will have the capacity for the 
expected data and voice traffic, and that it can support for all applications:

●

SIP,

●

DHCP,

●

HTTP/HTTPS, and

Also, QoS support is required to run VoIP on your configuration. For more information, see 

 and the QoS parameters L2QAUD, L2QSIG, DSCPAUD, 

and DSCPSIG in 

.

To operate properly, you need:

●

Category 5e cables designed to the IEEE 802.3af-2003 standard, for LAN powering,

●

Avaya Communication Manager 6.0 with Avaya Session Manager or 
Avaya Midsize Business Template 5.2.1 with Avaya SES 5.2.1,

●

A cabinet with a TN799C V3 or greater circuit pack or a TN2602 IP Media Processor circuit 
pack. Sites with a TN2302 IP Media Processor circuit pack are strongly encouraged to 
install a TN2602 circuit pack to benefit from the increased capacity.

!

Important:

IP telephone firmware requires TN799C V3 or greater C-LAN circuit pack(s). For 
more information, see the Communication Manager Software and Firmware 
Compatibility Matrix on the Avaya support Web site 

Later versions of the Communication Manager S87XX or S85XX can use Processor 
Ethernet in place of the C-LAN. 

Sites with H.248 gateways will use the Processor Ethernet (procr) on the S8300 in place of 
the C-LAN. The media processor resources are embedded on the gateway. See the 
gateway documentation for media processor capacity.

To ensure that the appropriate circuit pack(s) are administered on your Communication 
Manager call server, see