Avaya 1603SW Guia Do Utilizador

Use the following procedure to verify whether the DHCP server is installed.

1. Select Start-->Settings-->Control Panel. 

2. Double-click the Network icon.

3. Verify that Microsoft DHCP Server is listed as one of the Network Services on the 

Services tab.

4. If it is listed, continue with the next section. If it is not listed, install the DHCP server.

Use the following procedure to create a DHCP scope for the IP deskphones.

1. Select Start-->Programs-->Admin Tools-->DHCP Manager.

2. Expand Local Machine in the DHCP Servers window by double clicking it until the + sign 

changes to a - sign.

3. Select Scope-->Create.

4. Using information recorded in 

Define the Telephone IP Address Range.

Set the Subnet Mask.

To exclude any IP Addresses you do not want assigned to IP telephones within the Start 
and End addresses range:

a. In the Exclusion Range Start Address field, enter the first IP Address in the range that 

you want to exclude.

b. In the Exclusion Range End Address field, enter the last IP Address in the range that 

you want to exclude.

c. Click the Add button.

d. Repeat steps a. through c. for each IP Address range to be excluded.

Note:

Avaya recommends that you provision the 1603SW-I SIP IP Deskphones with 
sequential IP Addresses. Also do not mix 1603SW-I SIP IP Deskphones and PCs 
in the same scope.

5. Under Lease Duration, select the Limited To option and set the lease duration to the 

maximum.