Avaya 18d Guia De Ligação

AT&TConnect is the manager for all the PassageWay applications. Even when
a user is not using a PassageWay application, but is using the adapter in
Autodial mode (or "Hayes" mode), the AT&TConnect software ensures correct
operation of the serial port.

Every time you invoke Windows, AT&TConnect is automatically loaded (unless

you removed the AT&TConnect icon from your StartUp group), and its icon
appears at the bottom of your screen. If you did not specify a valid COM port
when you installed the PassageWay software, the system will prompt you for a
COM port when you invoke AT&TConnect. After you specify the COM port,

AT&TConnect retains this information and does not prompt you for it again.

Once AT&TConnect has a valid COM port, the software attempts to

communicate with the adapter. If AT&TConnect is unable to communicate with

the adapter, the system displays a troubleshooting window. When

AT&TConnect successfully communicates with the adapter, the AT&TConnect
icon appears at the bottom of your screen.

If AT&TConnect is in your StartUp group, the AT&TConnect icon is displayed

automatically at the bottom of your screen when you access Windows. To run
AT&TConnect manually, you must first access Windows and open the program
group that contains the PassageWay applications. To access AT&TConnect,
double-click on the AT&TConnect icon at the bottom of your screen. The
AT&TConnect window appears.