Avaya 18d Guia Do Utilizador

These System Programming procedures identify extensions to which
doorphones are connected. A doorphone is usually placed near an entrance, to
screen visitors. You can connect up to two doorphones to the system—use
Doorphone 1 Extension (#604) to identify the extension to which the first
doorphone is connected and Doorphone 2 Extension (#605)  to identify the
extension to which the second doorphone is connected.

■

■

■

You must use Doorphone Alert Extensions (#606) to identify the
extensions that signal when the doorphone button is pressed. Each
doorphone can signal any number of alert extensions.

To prevent outside calls from being made or received on the doorphone,

use Line Assignment (#301) to remove all outside lines from the doorphone
extension.  (Automatic Line Selection  for the doorphone extension will be
automatically  set to intercom First.)

You can use Message Light On with the doorphone (for example, to turn on
the doorphone’s light as a prearranged signal to a delivery person) provided
the doorphone is connected to an R3.1 206 module and the system is
equipped with an R3.1 processor module.

■

An extension cannot be used for a doorphone and a hotline at the same
time. However, hotlines and doorphones can have the same alert
extensions.

■

You cannot assign doorphones to extension 10, 11, 16, 17, 22, 23, 28, or 29.

■

Remove voice messaging system mailboxes from doorphone extensions.

■

You cannot bridge two doorphones together.

Extensions 12–15, 18–21, 24–27, 30–33
None Assigned  

✔

To program a doorphone extension:

1.

Press 

 

   

   

   

   

   

   

   

   

  

(for

Doorphone 1—or use #605 for Doorphone 2).

2.

Enter the doorphone extension number. For example, to identify extension 20
as a doorphone extension, press 

 

   

 . 

The display reads:

Door Phone 1

Data 20

3.

Select another procedure or exit programming mode.

Doorphone Extension (#604 and #605)