Magellan 210 Manual De Referência
Navigation Screens
21
Changing the Map Detail
The Map screen can be modified to show varying levels of map detail. This can be useful
while viewing very dense areas of the map where some of the fine details may not be needed
and clutter the display.
while viewing very dense areas of the map where some of the fine details may not be needed
and clutter the display.
To change the map detail:
1.
While viewing the Map screen, press MENU.
2.
Use the Arrow joystick to highlight
Map Setup.
3.
Press ENTER.
4.
Use the Arrow joystick to highlight the
Detail field.
5.
Press ENTER.
6.
Use the Arrow joystick to highlight
Lowest, Low, Medium, High or Highest.
7.
Press ENTER.
8.
Press NAV to return to the Map screen.
Changing the Track Recording Intervals
As you move, your eXplorist is recording your journey (track). You can select how often the
track points are recorded. In Auto mode, the eXplorist doesn’t save track points when you
are traveling in a straight line and only a few as you make turns. This saves memory and
provides a track log that, while slightly jagged, is suitable for most applications. In Detailed
Auto mode, the eXplorist does the same as in Auto mode, but the frequency of track points
saved is increased, especially during turns. While this uses more memory, it provides a very
accurate log of your travels. The other options are fixed interval track points. This instructs
your eXplorist to record a track point at the interval you specify.
track points are recorded. In Auto mode, the eXplorist doesn’t save track points when you
are traveling in a straight line and only a few as you make turns. This saves memory and
provides a track log that, while slightly jagged, is suitable for most applications. In Detailed
Auto mode, the eXplorist does the same as in Auto mode, but the frequency of track points
saved is increased, especially during turns. While this uses more memory, it provides a very
accurate log of your travels. The other options are fixed interval track points. This instructs
your eXplorist to record a track point at the interval you specify.
To change the track recoding intervals:
1.
While viewing the Map screen, press MENU.
2.
Use the Arrow joystick to highlight
Map Setup.
3.
Press ENTER.
4.
Use the Arrow joystick to highlight the Track Mode field.
5.
Press ENTER.
6.
Use the Arrow joystick to highlight
Off, Auto, Auto Detailed or any of the fixed
distance intervals.
7.
Press ENTER.
8.
Press NAV to return to the Map screen.