Magellan 210 Manual De Referência
54
The eXplorist has a set of advanced features that provides you with additional features to enhance the use of
your eXplorist. The advanced features are accessed from the Main Menu and include:
your eXplorist. The advanced features are accessed from the Main Menu and include:
•
Area Calculation: This will compute the area and the perimeter of a region that you define.
•
Fish/Hunt: This will display the best hunting and fishing times for a position and date that you enter.
•
Sun/Moon: This will display the rising and setting times for the sun and the moon for any position and
date you enter. It also displays the phase of the moon for that position and date.
•
Vertical Profile: This will graph the elevation levels for your active or a saved track log. (If you have a
MapSend Topo detailed map, it can also display a vertical profile of routes you have saved.)
•
Simulate: Provides you a tool for putting the eXplorist into a simulate mode. With the simulator turned
on, the eXplorist will operate as if it was moving. This provides a tool for you to use to try different
functions while sitting at your desk or campsite.
•
Communications: This is used to set your eXplorist into the mode you desire when it is connected to a
personal computer through the USB port. You can set up file transfers, transferring NMEA data, or
just using the USB cable to power the eXplorist.
Area Calculation uses three or more POIs that you select to create and display a region on a miniature map
display. It then takes this region and computes its area and perimeter.
display. It then takes this region and computes its area and perimeter.
Calculating an Area
1.
Press MENU.
2.
Use the Arrow joystick to highlight
Adv. Features.
3.
Press ENTER.
4.
Highlight
Area Calculation.
5.
Press ENTER.
6.
Highlight
<Add Point>.
7.
Press ENTER.
Note: Any previous area calculations you did are saved in memory and will be displayed. To create a new area
calculation you will first need to delete all of the POIs from the list. How to delete all of the POIs will be
explained following these instructions.
calculation you will first need to delete all of the POIs from the list. How to delete all of the POIs will be
explained following these instructions.
8.
Using the POI database, select a stored POI.
9.
Repeat steps 6 through 8 until you have a region defined.
10.
The bottom of the display will alternate between the area and the perimeter of the region you have
defined.
defined.
Using Area Calculation
Advanced Features