Epson 5000 Manual Do Utilizador

If the perforation is not aligned with the tear-off edge, adjust the
tear-off position by following the steps below:

Make sure the paper is in the tear-off position and the 

light is on.

While holding down the 

button, press the 

button to adjust the tear-off position to a lower position on the

page or press the 

button to adjust the tear-off position to a

higher position on the page. The printer remembers the new

tear-off position.

Tear off any printed pages.

When you begin printing, the printer automatically feeds the

paper back to the loading position and begins printing. (You can

also manually feed the paper back to the loading position by
pressing the 

or 

button.)

Note:

l

The printer has a minimum and maximum tear-off position. If
you try to advance the loading position beyond these limits,

the printer beeps and the paper stops moving.

l

When the paper reaches the factory-set tear-off position, the

printer beeps and paper feeding pauses briefly. Use the factory

setting as a reference point when adjusting the tear-off
position.