Epson plus Manual Do Utilizador

If you need to move the printer a short distance, such as from one

room to another, make sure that you keep the printer level.
If you are shipping the printer, you need to repackage the printer

and its accessories. Read and carefully follow the instructions below.

Also make sure that the shipper takes adequate precautions to avoid

damaging the printer.

Do not ship the printer with the drum unit

and developer unit installed in the printer. Also, do not

vacuum toner out of 

developer unit.

Packing for transportation
To pack 

printer you 

all the original packing materials that

came with the printer and 

packing tape. You also need two

large plastic bags for packing the drum unit and developer unit, to

contain 

toner displaced during shipping.

Prepare 

printer for transportation by following the steps below:

1. Be sure that your printer and computer are turned off.

2. Remove the power cord and 

cable connecting your printer

and computer.

3. If there is a cartridge in the cartridge slot, remove it.
4. Remove 

paper still in the paper cassette. Then remove the

paper cassette and 

face-up output tray from the printer.

Repackage 

tray in its original packing material.

5. Open 

printer using the latch at the front.

6. Lift out the basket and place it on a flat surface.