Epson plus Manual Do Utilizador
Assembling the Printer
Attaching the power cord
1. Before attaching the power cord, make sure that the power
switch on the left side of the printer is turned off. (It is off when
the O
side of
the
switch is pushed down.)
2. Attach
the
power cord to the socket at
the
back of the printer, as
shown below. Then plug the other end of the power cord into a
properly grounded outlet.
N o t e : D o n o t c o n n e c t t h e t o y o u r c o m p u t e r u n t i l t h e n e x t
c h a p t e r .
Setting the paper feed mechanism
Follow the steps below if you are using the printer for
the
first time
or if you have just transported the printer:
1. Be sure the printer is turned off; then remove the paper cassette.
2. Turn on the power by pressing the side of the power switch
1. Be sure the printer is turned off; then remove the paper cassette.
2. Turn on the power by pressing the side of the power switch
marked with the vertical bar. The power indicator lights and a
PAPER EMPTY
message appears.
Setting Up the Printer
1-23