Epson LQ-2080 Manual Do Utilizador

A5 size

CHAP2.FM

5/10/99

Pass 0

L

Proof Sign-off:
<Crestec>

_______

<Kimura>

_______

<Crestec>

_______

If you use the front or rear push tractor, you can use the tear-off 
feature to advance your continuous paper to the printer’s tear-off 
edge when you finish printing. You can then easily tear off the 
printed document. When you resume printing, the printer 
automatically feeds the paper back to the top-of-form position so 
that you can save the paper normally lost between documents.

As described below, you can use the tear-off feature in two ways: 
manually by pressing the printer’s Tear Off/Bin button, or 
automatically by turning on the auto tear-off mode.

If the perforation between pages is not aligned with the tear-off 
edge, you can adjust the position of the perforation using the 
micro adjust feature. See “Adjusting the Top-of-Form Position” 
on page 2-37.

 

c

Caution:
Never use the tear-off feature (by pressing the Tear Off/Bin 
button or turning on the auto tear-off mode as described below) 
to feed continuous paper with labels backward; they may come off 
their backing sheet and jam the printer. 

After the printer finishes printing your document, check that the 
Tear Off/Bin lights are not flashing. Then press the Tear Off/Bin 
button. The printer advances the paper to the tear-off edge.

Note:
If the Tear Off/Bin lights are flashing, the paper is in the tear-off position. 
If you press the Tear Off/Bin button, the printer feeds your paper to the 
next top-of-form position.