Epson LQ-2080 Manual Do Utilizador
3-6
Printing on Single Sheets
R4C3730
Rev. B
Rev. B
A5 size
CHAP3.FM
5/10/99
Pass 0
L
Proof Sign-off:
<Crestec>
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
Loading envelopes
You can load envelopes only in the top paper slot as described in
“Loading Single Sheets in the Top Paper Slot” on page 3-8. Also
follow these guidelines:
“Loading Single Sheets in the Top Paper Slot” on page 3-8. Also
follow these guidelines:
❏
Load envelopes one at a time in the top slot, with the flap edge
first and the flap side up.
first and the flap side up.
❏
Set the paper thickness lever (located under the printer cover)
to position 2 to 6 to match the thickness of the envelope.
to position 2 to 6 to match the thickness of the envelope.
❏
Before printing, turn on the card mode by pressing the
Tear Off/Bin button until both Tear Off/Bin lights are on.
After you finish printing on envelopes, press the Tear Off/
Bin button once to exit the card mode. (Bin 1 is selected.)
Tear Off/Bin button until both Tear Off/Bin lights are on.
After you finish printing on envelopes, press the Tear Off/
Bin button once to exit the card mode. (Bin 1 is selected.)
❏
Do not use envelopes that are curled or folded. Also avoid
using envelopes that are too thin; they may curl during
printing and become jammed.
using envelopes that are too thin; they may curl during
printing and become jammed.
❏
If you use No. 6 envelopes, align the left edge of the envelope
with the arrow mark on the printer.
with the arrow mark on the printer.
❏
Use envelopes only under normal temperature and humidity
conditions, as follows:
conditions, as follows:
Temperature
15 to 25°C (59 to 77°F)
Humidity
30 to 60% RH
flap side up, printable
side down
side down
New01.eps