Epson LQ-2080 Manual Do Utilizador
3-10
Printing on Single Sheets
R4C3730
Rev. B
Rev. B
A5 size
CHAP3.FM
5/10/99
Pass 0
L
Proof Sign-off:
<Crestec>
<Crestec>
_______
<Kimura>
_______
<Crestec>
_______
7. Check the printer driver settings as described in Chapter 4,
and change them if neccessary. Then send a print job to the
printer.
printer.
When the printer receives data, it prints the page and ejects it back
onto the paper guide. To continue printing your document,
remove the printed page and insert a new sheet of paper. If you
need to eject a sheet, press the Load/Eject button.
onto the paper guide. To continue printing your document,
remove the printed page and insert a new sheet of paper. If you
need to eject a sheet, press the Load/Eject button.
If the first printed line on your page appears too high or low, you
can fix this using the micro adjust feature. See “Adjusting the
Top-of-Form Position” on page 2-37.
can fix this using the micro adjust feature. See “Adjusting the
Top-of-Form Position” on page 2-37.
c
Caution:
Never use the knob to adjust the top-of-form position or eject a
sheet when the printer is on; this may damage the printer or cause
it to lose the top-of-form position.
Never use the knob to adjust the top-of-form position or eject a
sheet when the printer is on; this may damage the printer or cause
it to lose the top-of-form position.
Loading Single Sheets in the Front Paper Slot
To load paper in the front paper slot, follow these steps:
1. Make sure the paper guide is installed properly. If not, attach
it as described on page 1-11.
2. Make sure the paper guide cover is closed.