Epson 777 Manual Do Utilizador
26
Transporting the Printer
If you move your printer some distance, you need to prepare it for transportation in
its original box or one of a similar size. Follow these steps:
its original box or one of a similar size. Follow these steps:
To avoid damage, always leave the ink cartridges installed when
transporting the printer.
transporting the printer.
Be sure to remove the tape used in step 4 after installing the printer
in its new location.
in its new location.
1. Turn on the printer, wait until the print head locks in the far right position, then
turn off the printer.
2. Unplug the power cord from the electrical outlet. Then disconnect the printer
cable from the printer.
3. Remove any paper from the printer and remove the paper support.
4. Open the printer cover. Secure the ink
cartridge holder to the printer with tape as
shown, then close the printer cover.
shown, then close the printer cover.
5. Push in the output tray extension and close
the tray.
6. Repack the printer and its attachments in
the original box using the protective
materials that came with them. See your
Start Here sheet.
materials that came with them. See your
Start Here sheet.
Keep the printer level as you transport it.
After transporting the printer, remove the tape securing the print head and test your
printer. If you notice a decline in print quality, clean the print head (see page 19); if
output is misaligned, align the print head (see page 24).
printer. If you notice a decline in print quality, clean the print head (see page 19); if
output is misaligned, align the print head (see page 24).
Tape the ink cartridge holder
to the printer case
to the printer case