Epson 777 Manual Do Utilizador

Below are some troubleshooting tips if you have any problems setting up your printer, 
installing software, getting good print quality, feeding paper, or other problems.

■

The first time you install ink 
cartridges, the printer must charge its 
ink delivery system for a couple 
minutes. Wait until charging finishes 
(the 

 

Ppower light stops flashing) 

before you turn off the printer or it 
may charge improperly and use excess 
ink the next time you turn it on. If 
the printer stops moving or making 
noise, but the 

 

Ppower light is still 

flashing after 5 minutes, turn off the 
printer. If the light is still flashing 
when you turn it back on, see “Where 
To Get Help” on page 37.

■

Make sure the ink cartridge clamps 
are locked down completely and that 
no packing material remains in the 
printer. Turn off the printer, wait a 
moment, then turn it back on to clear 
the error.

■

Make sure your printer is turned on 
and the printer cable is securely 
connected at both ends. Then 
carefully follow the installation 
instructions on the Start Here sheet.
Also make sure your system meets the 
requirements beginning on page 39.

■

Close your other applications, 
including any screen savers and virus 
protection software and install again.

■

If your printer icon (SC 777) doesn’t 
appear in the Macintosh Chooser, 
you may have too many items in the 
Chooser. Delete any unused items 
and check the Chooser again.

■

Make sure that the Universal Serial 
Bus Controller is working properly in 
Device Manager; see your computer 
documentation. If it is not working, 
contact your computer dealer. 

■

If you see an error message or the 
software doesn’t install correctly on 
Windows 2000 or Windows NT, 
you may not have software 
installation privileges. 

■

In Windows 2000, don’t select 

Block

 

under 

Control Panel

> 

System

> 

Hardware

> 

Driver Signing

; select 

Ignore

 or 

Warn

 instead.

■

If you’re printing over a network, see 
your electronic Reference Guide for 
instructions on configuring your 
printer for use on a network.

■

If you’re installing Corel Print 
House,

™

 you’ll need to enter the 

product serial number located on the 
back of your Start Here sheet.