Epson 7850p Ficha De Dados Do Produto

EPSON PowerLite 7850p Projector

6/03

EPSON PowerLite 7850p Projector

Registering Projectors in EMP Monitor

Before you can monitor a projector, you have to register it.
Follow these steps:

1. Open EMP Monitor. You see this screen:

2. Click

projector

. You see this screen:

3. Click

Auto

detect to locate projectors currently operating

on the network. Or click

Manual

registration

and enter

the projector’s name and network address.

Note: If Auto detect fails to find the projector, your projector
may not be connected or configured correctly for the network.

Any projectors found on the network are listed:

4. Select each projector you want to add by clicking its name

and clicking

Add

. When you’re done, click

You see this screen listing all registered projectors:

Note: To delete a projector from the list, highlight the
projector name, and click

Delete

5. Click

. You see the status of each of your registered

projectors on the main EMP Monitor screen:

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
This lets you see which projectors are currently being used,
from which source (or port) they are projecting an image, and
if a problem occurs.

Note: To monitor a projector when it’s in standby mode (plugged
in but not projecting), you must first select

Network ON

as the

Standby Mode

setting in the projector’s Advanced1 menu. You

can monitor up to 64 projectors.

For detailed status information, select the projector and click

View details

Click here

Status icon

Video Source icon

Error icon