NavTour nt-147 Guia De Configuração Rápida

Start Up your NT-147

Charging the Battery

Parts Name and Function

NT-147
Quick Start Guide

NT-147
IR Remote Control
Car Charger
Stylus-Pen
AC Adaptor
Car-Holder
External Antenna

What's in the BOX

Support-CD
USB Client Cable
User Manual
Quick Start Guide
SD Card
Leather Case

●

front

top

bottom

back

Power

Destination

Direction Key / OK

Return

Zoom In

Zoom Out

Power Indicator LED

Main Menu

Reset

Stylus-Pen

Mini USB

External Antenna Jack

DC In

Antenna

Battery Switch

MIC

Speaker

right

left

SD Card Slot

IrDA

Volume Roller

Ear Phone Jack

Strap Link

Setting the battery switch to the ON position

Before starting to use your NT-147 for the first time, you

have to set the battery switch to the ON position. If the

switch is on the OFF position, alarm clock and time settings

will be initialized. Although data stored on the SD-Card are

still kept.

Insert SD-Card into your NT-147

Push the SD-Card carefully into the card slot. The labelled

side must point upwards. The memory card should slightly

lock in place. If you want to start the navigation software,

please ensure that the original SD-Card has been inserted

into the card slot.

There are two ways to charge your battery:

1.Connect the supplied AC adaptor to your NT-147 via 　
　the DC in port.

2.Connect the USB 　
　cable and the car 　
　charger to your　
　NT-147 via the 　　
Mini USB connector 　
as shown below.

(When the battery is fully charged,
the power LED will show green light.)

NT-147

OFF