TallyGenicom la650 Guia Do Utilizador
User guide
Paper handling
29
Open the colored latch lever of the right-hand
tractor and align it to the paper width.
tractor and align it to the paper width.
Insert the fanfold paper into the right-hand trac-
tor.
tor.
Make sure that it is inserted by the same length
as on the left-hand tractor in order to avoid any
paper jam.
as on the left-hand tractor in order to avoid any
paper jam.
Close the tractor flap and lock the tractor by
turning the tractor lever to the rear.
turning the tractor lever to the rear.
Do not tension the paper excessively
to avoid tearing the perforation holes;
do not allow excessive slack since in
this case the paper will bulge and
there may be problems in the feeding
process.
to avoid tearing the perforation holes;
do not allow excessive slack since in
this case the paper will bulge and
there may be problems in the feeding
process.
Make sure to align the paper stack in parallel
with the printer and that the paper flow is unob-
structed.
with the printer and that the paper flow is unob-
structed.
Re-install the bottom cover.
Lower the front cover.
Switch the printer on. The active paper source (Front1 = tractor 1)
appears in the display. The paper is automatically loaded when the
printer is in online mode (Ready) and receives data from the com-
puter.
appears in the display. The paper is automatically loaded when the
printer is in online mode (Ready) and receives data from the com-
puter.
Press the Load (4) key only to load paper before starting the
printout.
printout.
90
Ready
Front1
M1 EPS
Load
Online
Setup
2
1
3
4